http://lancsalliance.forumotion.com/lambretta-vespa-f7/-t1.htm Got a problem with your scoot??? Thu, 01 Oct 2009 20:01:01 GMT 10 http://i87.servimg.com/u/f87/11/07/15/56/web111.jpg http://lancsalliance.forumotion.com/lambretta-vespa-f7/-t1.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/t5-question-t332.htm Modern Myth
Been looking at these for a project but a bit confused about the T5 models. Pictures would help if anyone has them.

TA.]]> Lambretta/Vespa Tue, 12 Feb 2008 14:05:12 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/t5-question-t332.htm#1204 http://lancsalliance.forumotion.com/lambretta-vespa-f7/t5-question-t332.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/struggling-to-change-gear-t882.htm RFCDAZ my li 125 s3 has started to become stiff when changing 1st to 2nd and i struggle to get into neutral, i have replaced the cables had head set off and dremilled the inside where the cable sits (stickeys manual) the clutch plates are newish and is a standard set up, if any can can help or any one local to me Thornton/Blackpool then please get in touch, thanks Darryl Lambretta/Vespa Thu, 06 Nov 2008 15:53:56 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/struggling-to-change-gear-t882.htm#4830 http://lancsalliance.forumotion.com/lambretta-vespa-f7/struggling-to-change-gear-t882.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/lml-service-t1640.htm skinsixx
Cheers guys]]> Lambretta/Vespa Thu, 01 Oct 2009 20:01:01 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/lml-service-t1640.htm#10148 http://lancsalliance.forumotion.com/lambretta-vespa-f7/lml-service-t1640.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/poor-starting-and-erratic-tick-over-on-a-vespa-t1573.htm road runner ian My vespa is bad starting more when cold ie. first thing in the morning i end up kicking at least twenty times so almosts floods. when hot you sometimes have to use the choke.the tickover when cold is 2600 revs without the choke being on when hot it is 1500 revs petering away to zero. it has so i got told had new rings in and seals.i have noticed on warm days like monday it started 2nd time cold and today it took twenty kicks any advice would be welcome thanks ian Lambretta/Vespa Tue, 08 Sep 2009 18:35:48 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/poor-starting-and-erratic-tick-over-on-a-vespa-t1573.htm#9615 http://lancsalliance.forumotion.com/lambretta-vespa-f7/poor-starting-and-erratic-tick-over-on-a-vespa-t1573.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/powder-coating-t1127.htm Meltonian ?

]]> Lambretta/Vespa Mon, 02 Mar 2009 21:19:32 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/powder-coating-t1127.htm#6854 http://lancsalliance.forumotion.com/lambretta-vespa-f7/powder-coating-t1127.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/cheap-repairs-in-lancs-yorks-area-t1489.htm DazzerLancs Vespa, Lambretta repairs and servicing now being carried out in Lancs/Yorks border, cheap rates, no bollox. Ring 07706745376 ask for Daz or 07706556388 ask for Lance. Wiring faults, re-cabling to full engine rebuilds. Lambretta/Vespa Sun, 02 Aug 2009 22:05:05 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/cheap-repairs-in-lancs-yorks-area-t1489.htm#9028 http://lancsalliance.forumotion.com/lambretta-vespa-f7/cheap-repairs-in-lancs-yorks-area-t1489.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-t1527.htm Chrissie

Does anyone know or can recommend a good scooter repair shop/garage in or around St.Helens area. Any information even if it's just information on who not to take it to would be helpfull.

PM me if you can help. Cheers Chrissie.]]> Lambretta/Vespa Mon, 17 Aug 2009 08:44:12 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-t1527.htm#9239 http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-t1527.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/thank-you-t1424.htm The Major Mick (Bolton Road Runners SC) Thanks for all the help last night mate, my clutch is mooooooch better Lambretta/Vespa Thu, 02 Jul 2009 16:49:39 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/thank-you-t1424.htm#8692 http://lancsalliance.forumotion.com/lambretta-vespa-f7/thank-you-t1424.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/air-mixture-t1401.htm The Major Came back from Cleethorpes on my sons 1983 Vespa 125 / 180 DR Kit and it started to splutter a bit. Yesterday i took the carb apart and blew through the jets and cleaned out all the filters and sump. There was some sediment in there. While i was doing this i noticed that there was a bit of fuel and 2 stroke in the bottom of the housing that protects the whole carb n stuff. As i cleaned it out i inadvertently moved the air intake screw and then tried to correct it and am now lost! When ... Lambretta/Vespa Wed, 24 Jun 2009 20:15:26 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/air-mixture-t1401.htm#8593 http://lancsalliance.forumotion.com/lambretta-vespa-f7/air-mixture-t1401.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/rear-wheel-locking-up-t1352.htm vezzy cheers]]> Lambretta/Vespa Tue, 09 Jun 2009 21:15:21 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/rear-wheel-locking-up-t1352.htm#8364 http://lancsalliance.forumotion.com/lambretta-vespa-f7/rear-wheel-locking-up-t1352.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-choke-carb-problem-t1359.htm WarringtonScouse
Ok All was working fine, then when pull clutch in the scoot, GP TS1, started to rev like anything.

Got it home, started it up and it just revved its little arse off while in neutral. Now when I put the choke on...yes its deffo on, it calms down, ticks over ok. Put the choke off and it revs again..

Any ideas?oh its a mikuni carb]]> Lambretta/Vespa Thu, 11 Jun 2009 20:14:08 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-choke-carb-problem-t1359.htm#8391 http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-choke-carb-problem-t1359.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/sat-nav-t1161.htm wayne thanks]]> Lambretta/Vespa Wed, 18 Mar 2009 11:50:57 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/sat-nav-t1161.htm#7030 http://lancsalliance.forumotion.com/lambretta-vespa-f7/sat-nav-t1161.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/px-cutaway-engine-t1262.htm Modern Myth ]]> Lambretta/Vespa Tue, 28 Apr 2009 15:13:30 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/px-cutaway-engine-t1262.htm#7602 http://lancsalliance.forumotion.com/lambretta-vespa-f7/px-cutaway-engine-t1262.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-problem-t1254.htm DazzerLancs Hello folks, got an odd one here, sil gp200 motor with 22mm jetex running through air box, gp air scoop. Got a sterling pipe on it, everything else standard. The bike starts and ticks over well, it goes through the gears well and revs up through the rev range well. The problem is when i let off the revs when coming to junctions or traffic lights ect, the scoots wants to stall, i have to pull in the clutch and rev past it to get it running, once i do this its ok, still running it in so dont want ... Lambretta/Vespa Sat, 25 Apr 2009 21:06:32 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-problem-t1254.htm#7540 http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-problem-t1254.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/what-is-this-colour-t727.htm andyliverpoolmod got a px efl frame with a carlsberg paint job under all the crappy paint sadly the green has had rust patchs in palces Lambretta/Vespa Tue, 29 Jul 2008 18:34:37 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/what-is-this-colour-t727.htm#3495 http://lancsalliance.forumotion.com/lambretta-vespa-f7/what-is-this-colour-t727.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/ts1-clutch-t1237.htm WarringtonScouse I am a simpleton...there said it.(Vespa man for 38.7 years, Lammie for 3 months!!) Anyway, GP TS1, when in gear with clutch held in the beast edged forward. easy enough I'll adjust the cable. No longer edges, but now bites almost as soon as clutch pulled in, and will cut out. Is this the norm? Dont want to start tinkering if there is no problem. If i put it back it edges slighty but wont cut out. Also if i try to move backwards in gear with clutch in it cuts out with both scenarios. essay ... Lambretta/Vespa Mon, 20 Apr 2009 15:50:09 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/ts1-clutch-t1237.htm#7437 http://lancsalliance.forumotion.com/lambretta-vespa-f7/ts1-clutch-t1237.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/jet-size-help-please-t1185.htm kaz
Thanks.

Sorry fellas, dumb ass me meant to say it's running with a Mikeck exhaust!!! ]]> Lambretta/Vespa Tue, 31 Mar 2009 17:23:02 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/jet-size-help-please-t1185.htm#7181 http://lancsalliance.forumotion.com/lambretta-vespa-f7/jet-size-help-please-t1185.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/the-cosa-t1222.htm Modern Myth
Never seen a Cosa on the road but wondered if anyone can tell me a bit about it and when they were made?

Thanks.]]> Lambretta/Vespa Thu, 16 Apr 2009 18:59:33 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/the-cosa-t1222.htm#7351 http://lancsalliance.forumotion.com/lambretta-vespa-f7/the-cosa-t1222.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/polini-208-t1188.htm AITCH ANYBODY know what the cylinder head need,s to be machined out
to for 1 of these kit,s?,cheer,s ....AITCH]]> Lambretta/Vespa Tue, 31 Mar 2009 19:45:58 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/polini-208-t1188.htm#7185 http://lancsalliance.forumotion.com/lambretta-vespa-f7/polini-208-t1188.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/setting-up-a-28mm-delorto-t1187.htm kev bratt just put a 28mm delorto onto a gp200 with a sterling exhaust. anybody any idea of jetting size /? please...... Lambretta/Vespa Tue, 31 Mar 2009 19:22:24 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/setting-up-a-28mm-delorto-t1187.htm#7184 http://lancsalliance.forumotion.com/lambretta-vespa-f7/setting-up-a-28mm-delorto-t1187.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/where-is-the-best-place-t1153.htm R KID Where is the best place to get my vespa gts fixed? I`m in Blackley, Manchester! It wont start or anything so i will need to sort out the transportation of it aswell. I use my scooter everyday for work and i do need to get it sorted asap! cheers for any advice. Lambretta/Vespa Mon, 16 Mar 2009 21:13:52 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/where-is-the-best-place-t1153.htm#7005 http://lancsalliance.forumotion.com/lambretta-vespa-f7/where-is-the-best-place-t1153.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/removing-mirrors-t1133.htm theylookwarm
Is there an easy way of removing these fittings without stripping everything down? I know I could probably chop em off, but wanted to be a bit more cultured ;)

Cheers]]> Lambretta/Vespa Sat, 07 Mar 2009 18:36:38 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/removing-mirrors-t1133.htm#6890 http://lancsalliance.forumotion.com/lambretta-vespa-f7/removing-mirrors-t1133.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/fuel-leak-t1046.htm The Major
Got up this morning and there was a pool/drip of fuel enough to stink out the garage???? I noticed that the fuel tap was on so i turned it off?

Why did it just do that?? Was it because of some vacuum or summat??

Help please]]> Lambretta/Vespa Sat, 31 Jan 2009 20:59:04 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/fuel-leak-t1046.htm#6312 http://lancsalliance.forumotion.com/lambretta-vespa-f7/fuel-leak-t1046.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/px200-t1005.htm carpetmonkey bought a px200 last year slight knock when clutch pulled in , needs a good service all round. thinking of taking to pm tuning heysham, as i live in barrow 30 miles away. anybody got any comments on them good or bad cheers. Lambretta/Vespa Tue, 13 Jan 2009 20:00:34 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/px200-t1005.htm#6061 http://lancsalliance.forumotion.com/lambretta-vespa-f7/px200-t1005.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/info-on-electric-starter-t913.htm happylarry can you get a eletric starter for a vespa px 125 with a t5 engine thanks......................... Lambretta/Vespa Sat, 22 Nov 2008 18:14:54 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/info-on-electric-starter-t913.htm#5310 http://lancsalliance.forumotion.com/lambretta-vespa-f7/info-on-electric-starter-t913.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-required-for-a-vespa-vbb-t924.htm Dream Warrior
]]> Lambretta/Vespa Sat, 29 Nov 2008 09:57:28 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-required-for-a-vespa-vbb-t924.htm#5414 http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-required-for-a-vespa-vbb-t924.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/vespa-px-front-disc-brake-t879.htm shiney im getting a slight juddering when i pull my front brake are the pads on the way out Lambretta/Vespa Mon, 03 Nov 2008 20:33:11 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/vespa-px-front-disc-brake-t879.htm#4815 http://lancsalliance.forumotion.com/lambretta-vespa-f7/vespa-px-front-disc-brake-t879.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/hign-tick-over-t875.htm The Major
I only got the scoot yesterday.

Any tips please]]> Lambretta/Vespa Sat, 01 Nov 2008 13:38:00 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/hign-tick-over-t875.htm#4797 http://lancsalliance.forumotion.com/lambretta-vespa-f7/hign-tick-over-t875.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/problem-starter-motor-t856.htm carpetmonkey hi new to the site but looking for help, bought a px200 disc 2001. no mot or tax flat battery, when charged battery and connected electric start kicks in, no horn neither. any ideas anybody. Lambretta/Vespa Mon, 13 Oct 2008 20:51:21 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/problem-starter-motor-t856.htm#4613 http://lancsalliance.forumotion.com/lambretta-vespa-f7/problem-starter-motor-t856.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/bleeding-brakes-t844.htm andyliverpoolmod ]]> Lambretta/Vespa Wed, 08 Oct 2008 21:48:38 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/bleeding-brakes-t844.htm#4550 http://lancsalliance.forumotion.com/lambretta-vespa-f7/bleeding-brakes-t844.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/oil-leaking-from-the-lipstick-t800.htm shiney my mate from sweden "chorley" has asked me to post this he has got oil leaking from the oil "lipstick" could this be just the gasket any ideas anyone Lambretta/Vespa Fri, 12 Sep 2008 20:49:52 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/oil-leaking-from-the-lipstick-t800.htm#4226 http://lancsalliance.forumotion.com/lambretta-vespa-f7/oil-leaking-from-the-lipstick-t800.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/castrol-r-t547.htm speedway i'd like to get some castrol R? for my malossi 210 kitted vespa,where/who sells it what grade and will it be any good in a kitted vespa??can only find R40 for sale but have been told its R30 to use in a scoot,any ideas????cheers. Lambretta/Vespa Wed, 07 May 2008 21:24:38 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/castrol-r-t547.htm#2322 http://lancsalliance.forumotion.com/lambretta-vespa-f7/castrol-r-t547.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/side-panel-catch-t771.htm keano40
Anyone any idea how to get this back on as the side panel is hanging off??!!]]> Lambretta/Vespa Sun, 31 Aug 2008 19:41:24 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/side-panel-catch-t771.htm#3830 http://lancsalliance.forumotion.com/lambretta-vespa-f7/side-panel-catch-t771.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/dyno-testing-t738.htm The Major
a. What is the general opinion on Dyno

b. Where is the local Dyno center for Lammys taking into consideration that i am in Southport area.


Thank you


Dai]]> Lambretta/Vespa Mon, 04 Aug 2008 11:39:18 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/dyno-testing-t738.htm#3549 http://lancsalliance.forumotion.com/lambretta-vespa-f7/dyno-testing-t738.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/lx50-fuel-guage-t763.htm Underlord Any advice? Easy remedy?

Thanks in advance.]]> Lambretta/Vespa Tue, 19 Aug 2008 12:59:36 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/lx50-fuel-guage-t763.htm#3753 http://lancsalliance.forumotion.com/lambretta-vespa-f7/lx50-fuel-guage-t763.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/non-starter-lammy-t717.htm The Major Having a drama with Spennys scooter: It won't start. History: It split the rubber carb inlet manifold on the way to Holland. I changed it for an alloy one, new hose, new gaskets the lot. Problem was the side panel wouldn't go on as it has a 185 kit and 28mm flat side d'lorto. With an alloy inlet manifold it sticks out a further 3mm and the panel will not go on unless the cone part of the carb is removed. Did all this and it ran a dream from St Helens to Southport (18 miles). After ... Lambretta/Vespa Tue, 22 Jul 2008 20:37:04 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/non-starter-lammy-t717.htm#3432 http://lancsalliance.forumotion.com/lambretta-vespa-f7/non-starter-lammy-t717.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/simmonini-pipe-t658.htm WOOLYBACK1 i was thinking about putting one of these on my T5 do they make any difference in performance over the standard pipe and do i have to change the main jet. Lambretta/Vespa Mon, 23 Jun 2008 10:14:11 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/simmonini-pipe-t658.htm#3095 http://lancsalliance.forumotion.com/lambretta-vespa-f7/simmonini-pipe-t658.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/securing-vespa-flyweel-nut-t725.htm stringy1 loctite?,my flywheel nut came loose whilst riding to work through orrel.it happened b4 resulting in woodruff key shearing off,thus wrecking the crank,disaster struck again when i heard a rattling,then my p2 died . got 2 borrow flywheel extractor to see the damage ,CHECK YOUR FLYWHEEL NUT! Lambretta/Vespa Tue, 29 Jul 2008 02:23:54 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/securing-vespa-flyweel-nut-t725.htm#3487 http://lancsalliance.forumotion.com/lambretta-vespa-f7/securing-vespa-flyweel-nut-t725.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/disconnecting-indicator-noise-t711.htm keano40
How do i do this? (step by step please i'm not the best technically!!)

Cheers]]> Lambretta/Vespa Fri, 18 Jul 2008 22:24:38 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/disconnecting-indicator-noise-t711.htm#3419 http://lancsalliance.forumotion.com/lambretta-vespa-f7/disconnecting-indicator-noise-t711.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/tyres-for-gts-t722.htm Bryn Cheers]]> Lambretta/Vespa Sun, 27 Jul 2008 17:30:14 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/tyres-for-gts-t722.htm#3469 http://lancsalliance.forumotion.com/lambretta-vespa-f7/tyres-for-gts-t722.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/malossi-210-timing-settings-t550.htm speedway can some one tell me if you have to change the timing on a px 200 when fitting a malossi 210 kit?? i have run the kit for the last 8months on the stock setting(A)with no probs??but have just been researching on the malossi site that i should have changed it to the stock timing for a 125(IT)??,cheers Lambretta/Vespa Sat, 10 May 2008 21:23:45 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/malossi-210-timing-settings-t550.htm#2343 http://lancsalliance.forumotion.com/lambretta-vespa-f7/malossi-210-timing-settings-t550.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/for-those-in-the-know-t598.htm Modern Myth Many thanks.]]> Lambretta/Vespa Wed, 04 Jun 2008 11:37:17 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/for-those-in-the-know-t598.htm#2671 http://lancsalliance.forumotion.com/lambretta-vespa-f7/for-those-in-the-know-t598.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-needed-fast-t642.htm andyliverpoolmod
]]> Lambretta/Vespa Wed, 18 Jun 2008 12:21:38 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-needed-fast-t642.htm#2978 http://lancsalliance.forumotion.com/lambretta-vespa-f7/help-needed-fast-t642.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/which-vespa-t279.htm Modern Myth
Thanks.]]> Lambretta/Vespa Wed, 16 Jan 2008 17:54:03 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/which-vespa-t279.htm#1002 http://lancsalliance.forumotion.com/lambretta-vespa-f7/which-vespa-t279.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/light-help-t383.htm andyliverpoolmod

any 1 go any electric diagrams to help me wire them up with out effecting lights]]> Lambretta/Vespa Thu, 28 Feb 2008 19:37:51 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/light-help-t383.htm#1464 http://lancsalliance.forumotion.com/lambretta-vespa-f7/light-help-t383.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/jet-sizes-t556.htm REDDY knows jet sizes to use?]]> Lambretta/Vespa Wed, 14 May 2008 21:20:05 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/jet-sizes-t556.htm#2382 http://lancsalliance.forumotion.com/lambretta-vespa-f7/jet-sizes-t556.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/poor-lighting-and-silent-horn-t549.htm andyliverpoolmod heres the story i go out on a lovely day lose track of time riding with other scooters have to put lights on and after a hour or so they will dim to 6volt lighting and the horn will fail the engine was built to run only on side lights how can i upgrade my piaggio nrg extreme engine to make the same voltage as a gilera runner or could i get bulbs which run on very little electrics and still be bright ???? Lambretta/Vespa Sat, 10 May 2008 13:53:12 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/poor-lighting-and-silent-horn-t549.htm#2336 http://lancsalliance.forumotion.com/lambretta-vespa-f7/poor-lighting-and-silent-horn-t549.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/carb-for-240-t488.htm theclash whats the correct size carbto run on a 240 and what size jets Lambretta/Vespa Sat, 05 Apr 2008 08:31:36 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/carb-for-240-t488.htm#1988 http://lancsalliance.forumotion.com/lambretta-vespa-f7/carb-for-240-t488.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-problem-t189.htm Anonymous buy italian not spanish if you are called wing commander or at least fit new petrol pipe from happy cowabunga wing commander and dazerlancs all the same person ..... Lambretta/Vespa Thu, 06 Dec 2007 00:18:18 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-problem-t189.htm#607 http://lancsalliance.forumotion.com/lambretta-vespa-f7/lambretta-problem-t189.htm http://lancsalliance.forumotion.com/lambretta-vespa-f7/exhaust-t108.htm Anonymous thanks happy]]> Lambretta/Vespa Tue, 23 Oct 2007 21:27:26 GMT http://lancsalliance.forumotion.com/lambretta-vespa-f7/exhaust-t108.htm#257 http://lancsalliance.forumotion.com/lambretta-vespa-f7/exhaust-t108.htm